Igt Slot Machine Settings

broken image


IGT S-Plus, S2000 or S2000 Vision

FREE DELIVERY – FREE DEMONSTRATION – FREE CABINET WITH EVERY MACHINE – All SINGLE GAME $2200 Call Us at: 937-623-3600 or 937-371-3700 e-mail: email protected or email protected International Gaming Technology (IGT) video slot machines for sale listed below are the single or mult-game with the a hard drive platform. IGT I Game Plus Key 22 Chip Installation Instructions 1. Turn power off to machine 2. Remove processor tray located below the monitor. (Pull on handle while holding under tray) 3. Place processor tray on a flat surface. Replace all software chips and simms with your new set of software accept for the larger base chip. Find the Base Chip. IGT Key chips are used to enter the menus and setup options This new key and clear chip is not backward compatible and will only work with the new 044 enhanced memory themes When using an I-game + with a 044 board with a memory board you need to use a KEY00028 - This fits into U30 position How to use the KEY00028 program: Remove the base chip.

IGT model identification one machine is always confusing. They look so much alike that if you don't know what to look for then you probably just guess or go by what someone tells you that it is. Many of the games are available in more than one model of machine so knowing which machine is which is important. White orchid slot.

S-PLUS – There are 3 ways this machine can be identified. Usually these machines have six serial numbers on the right side The ‘Winner Paid' and ‘Credits' meters are to the left of the center of the reel glass. The also have the motherboard behind the hopper.

Igt
Igt slot machine troubleshooting

Balloonies Slot Machine Game by IGT: Set Your Bets 1 to 1000 What makes Balloonies slot machine by IGT such a unique machine is the extreme attention to the gamblers' requests and demands. Its childish theme seems to match with the layout, designed for the gamblers to feel like they're gambling in the sky.

Igt Slot Machine For Sale

S-2000 – Almost any part of these machines can be upgraded, doors,bill and I think you can get different colored speakers. You can identify these by the long meter to the left of the reel glass, the serial number is seven numbers on the side or you may notice that these machines are capable of taking multiple denominations ($.25 or $.50) there reel glass will show these markings.

Vision – The Vision games machines look identical to S-2000s except that the have a monitor on the upper glass and a plays a bonus game. The monitor appears flush with the glass and not bordered with lights.

Reel Touch – These machines have a round top and inset monitor with an lighted frame. These are 5 reel machines and the reels are back lit have five back-lit reels. The reel-touch are similar in appearance to the S- 2000 many of the internal parts are the same.

Igt Slot Machine Troubleshooting

I-Plus – Typically you will find these as either a video slot or video poker. The Game King is an example of a multi-game machine built on the I-Plus platform. They are identifiable by their round top, large video display. The display is a touch screen and used to select the games

Details

IGT Key chips are used to enter the menus and setup options This new key and clear chip is not backward compatible and will only work with the new 044 enhanced memory themes When using an I-game + with a 044 board with a memory board you need to use a KEY00028 - This fits into U30 position How to use the KEY00028 program: Remove the base chip from the processor board Insert the key chip into the empty socket Place the board back in the machine and turn 'on' / Replace boot PROM with KEY00028 and power up machine Initial menu for selections are shown for RAM OPERATIONS, EEPROM OPERATIONS, and KEYCHIP - Note: This keychip uses the touchscreen in place of the attendant key and test switch From the screen select the required action/s by following the on-screen instructions The user can expand or collapse the selections that have a '+' on the left side of the menu item by touching the menu item If 'CLEAR ALL RAM' is selected, the user is prompted with a yes/no window to confirm the selection If 'CLEAR MOTHERBOARD E2' is selected, the user is prompted with a yes/no window to confirm the selection If 'KEYCHIP' is selected, the user is prompted with a yes/no window to confirm the selection Once completed select 'REBOOT MACHINE' and follow the instructions Replace the BASE chip, power-up and you are now in the key chip menu It is important to understand that the options in KEY00028 are processed when they are confirmed If KEY00028 is used, clearing of RAM and E2 should be done before setting the keychip flag




broken image